RUiXU Lithi2-16 - Protection

Version: V1.0 Page
31
of 50
3.4 Protection
Please re-charge the battery via solar, grid/generator or other energy source within 24h if the battery is over
discharged.
Manually short-circuit and reverse the battery will void the warranty.
Items
Description
Remark
Charge End
Cell/PACK
high-voltage
The BMS will stop charging if any cell or PACK
voltage reach the protection value and it will be
auto-released only when both Pack and cell voltage
back to the release voltage range or there is efficient
discharge current
Discharge End
Cell/PACK
low-voltage
The BMS will stop discharging if any cell or PACK
voltage is under the protection value and it will be
released only when all the cell voltage back to the
release voltage range or there is efficient charge current
Can Automatic recovery.
Please charge timely,
otherwise it may be in
Low-power mode to be
over-discharged.
High temperature
The BMS will stop charging or discharging or both if
any cell/environment/MOS temperature is beyond the
range.
Automatic recovery
Low temperature
The BMS will stop charging or discharging or both if
any cell/environment/MOS temperature is under the
range.
Automatic recovery
Charge over-current
The BMS will stop charging when the charging current
is higher than the protection value. And it will release
from the protection when the system delays time is met.
Automatic recovery. If
locked after three
consecutive times,