Runxin 63504 User Manual

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3
16
 Flash, enter program set mode. Press or to adjust values.
D. Manu/Confirm button
 Press , light on, enter program display mode and use or to
view all values.
 In program display mode, press , flash, enter program set mode,
press or and adjust values.
 Press after all program are set, and then the voice “Di” means all
setting are success and return program display mode.
E. Manual/Return button
 Press in any status, it can proceed to next step.(Example: If outlet
water is unqualified, press in Service status, it will start
regeneration cycles instantly; Press while it is in Backwash
status, it will end backwash and go to Brine &Slow Rinse at once.)
 Press in program display mode, and it will return in Service; Press
in program set mode, and it will return program display mode.
 Press while adjusting the value, then it will return program display
mode directly without saving value.
F. Down▼ and Up▲
 In program display mode, press ▲or▼ to view all values.
 In program set mode, press ▲or▼ to adjust values.
 Press and hold both ▲and ▼for 5 seconds to lift the Button Lock
status.

Runxin 63504 Specifications

General

Brand	Runxin
Model	63504
Category	Control Unit
Language	English