Runxin 63504 User Manual

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3
2
50℃,water pressure 0.15～0.6MPa. Failure to use this product under
such conditions voids the warranty.
 If the water pressure exceeds 0.6Mpa, a pressure reducing valve
must be installed before the water inlet. While, if the water pressure
under 0.15MPa, a booster pump must be installed before the water inlet.
 It is suggested to install PPR pipe, corrugated pipe or UPVC pipe,
instead of TTLSG pipe.
 Do not let children touch or play, because careless operating may
cause the procedure changed.
 When the attached cables of this product and transformer are changed,
they must be changed to the one that is from our factory.

Runxin 63504 Specifications

General

Brand	Runxin
Model	63504
Category	Control Unit
Language	English

Summary

User Manual

Product Overview

Product Characteristics

Product Structure and Technical Parameters

Installation

Provides guidance and steps for the proper installation of the control valve.

Basic Setting & Usage

Basic Setting & Usage

Details the fundamental procedures for setting up and operating the valve.

Parameter specifications

Applications

The Function and Connection of PC Board

Parameter settlement

Parameter Enquiry and Setting

Explains how to view and adjust various operational parameters of the valve.

Trouble-Shooting

Control Valve Fault

Lists common problems with the control valve and their respective solutions.

Trial running