Before the valve put into use, please fill in the below content so as to help us to refer
in the future.
Note: The following partial functions need to be configured with the WIFI control
board. Please consult your local dealer before selecting the model. This product has
water leakage protection function. When setting relevant parameters, it should be
set according to the actual situation of the household water, so as to avoid
unnecessary loss.
Softener System Configuration
Tank Size: Dia. mm；Height mm；
Resin Volume L；Brine Tank Capacity L；
Hardness of Raw Water mmol/L；
Pressure of Inlet Water MPa；
Control Valve Model ； Number ；
The Specification of Drain Line Flow Control ；
The Specification of Brine Line Flow Control ；
Injector No. 。
Water Source: Ground-water□ Filtered Ground-water□ Tap Water □ Other
Parameter Set
To Next Page
Loading...
