MODEL 53515/53615/63515/63615/73515/73615
7
In the above table, First Grade Na
+
represents First Grade Na
+
Exchanger. Second Grade Na
+
represents Second Grade Na
+
Exchanger.
When the water turbidity exceeds the conditions, a filter should be
installed on the inlet of control valve.
When the water hardness exceeds the conditions, the outlet water
hardness will hardly reach the requirement of boiler feed water (0.03
mmol/L). It is suggested to adopt second grade softener.
1.4. Product Structure and Technical Parameters
A. Product dimension (The appearance is just for reference. It is
subjected to the real product.)
Remark:
Remove the flow meter from 53615, it will be 53515.
To Next Page
Loading...
Need help?
General
