USER MANUAL V4.0 | Updated Jan 06, 2021 5
SAFETY INFORMATION
Ensure the printer is set to STOP before installing or removing a cartridge.
Avoid using printer with high voltage and/or non-compatible power supplies or
external electronic accessories.
Ensure printer is installed and stored in a manner to prevent any strong impacts from
any external objects.
Minimize the use and storage of the printer in high dust environments.
The working temperature of the printer is 5
o
C – 50
o
C.
Turn off printer before plugging or removing any cable (ENCODER / SENSOR / IO).
Be careful when using other external devices such as: ENCODER / SENSOR / ALARM
BEACON / POWER SUPPLY.
Only use authorized cartridges provided by your authorized supplier.
Ensure you follow all instructions while installing new firmware and software.
Use mask and safety goggles to prevent exposure to any airborne inks.
Use gloves to prevent any cuts while installing the printer with the mounting bracket
as there may be sharp edges.
Do not expose to excessive heat sources, sunshine, fire or the like.
For indoor use only. Printer should not be exposed to water.
The power-outlet shall be installed near the equipment and shall be easily accessible.
No replaceable parts inside, refer servicing to manufacturer specified agency or
qualified service personnel
Only use accessories specified by the manufacturer.
Disposal: all electrical and electronic products including batteries should be disposed
of separately from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
Please ensure the printer and your systems are properly grounded.
Use only the power supply listed in the user instructions: power supply adaptor:
manufacturer: MEAN WELL ENTERPRISES CO., LTD., MODEL NO.: GST60A24
To Next Page
Loading...
