Rynan R20 - POD Settings

USER MANUAL V4.0 | Updated Jan 06, 2021 37
6.4.3. Common
6.4.3.a. Font name and Font size
Set default font name and font size for some objects as: Text, Counter, Datetime, Barcode,…
6.4.3.b. Design unit
Set default unit for printer system: Millimeter, Centimeter, Inch and Pixel.
6.4.3.c. Price unit
Set the local currency, this setting will help in case Ink Calculate.
6.4.3.d. Language
Select User interface languages: English (default), German, Vietnamese, Chinese, Korean,
Russian, Turkish, Portuguese, Spanish, Polish, Greek and Italian.
6.4.3.e. Keyboard
Select the keyboard input that you will use in Design tool.
6.4.3.f. System time
Adjust the system time include the Software and your Windows OS time.
6.4.4. Backup/Restore settings
6.4.4.a. Backup
Backup your Settings to usb flash.
6.4.4.b. Restore
Restore Settings had backup from usb flash.
6.4.4.c. Reset default
Reset your machine settings to the factory defaults.
6.4.4.d. Refresh connection
This button will help in case printer show disconnected with printhead. Press this button to
refresh connection between controller with printhead.
6.5. POD Settings
Allow sending or receiving data / remote printer / get current status from 3
rd
party devices
(Desktop / Laptop / PLC / Mobile devices / …) via TCP/IP protocol, we call Sender.