English
SOLUBLE 1
00000 LIM:00500
Press "ENTER" to display the soluble product block
parameter.
STOP WATER
00000 LIM:00500
This function allows the setting of a number of water vends
before blocking, Press "ENTER" to display the block
parameter.
STOP GROUNDS
00000 LIM:00100
This function allows the setting of a number of coffee
grounds expulsions before blocking. Press "ENTER" to
visualize the block parameter.
RESET STOP
This function allows the zeroing of all the product quantity
partial counters. Press "ENTER" to access this option.
RESET STOP
->Y<- N
To set this function follow the procedure described in
chapter "7.5 Changing and saving parameters": Confirming
the letter "->Y<-" zeroes the counters.
MIN. TEMPERATURE
This function allows setting the temperature maintained by
the de vice for a few minutes (about 4) after a drink has
been dispensed The lower line of the display shows the set
value, expressed in degrees centigrade. To set the
minimum maintained temperature follow the procedure
described in chapter "7.5 Changing and saving parameters".
MIN. TEMPERATURE
T:100
This function allows the setting of the temperature reached
by the device after a certain period of inactivity (about 4
minutes) to compensate the natural temperature fall. The
lower line of the display shows the set value, expressed in
degrees centigrade. To set the inactivity temperature follow
the procedure described in chapter "7.5 Changing and
saving parameters".
MECH. COUNTER
BEVERAGE
This function allows, only if the mechanic pulse counter is
fitted, to enable or not the total or partial counting of drink
vends. To obtain drink vend total count enable the "MECH.
COUNTER BEVERAGE" function. To obtain drink vend total
count enable the "MECH. COUNTER BEVERAGE" or
"MECH. COUNTER SOLUBLE" functions (only D.A.5P)
or"MECH. COUNTER COFFEE". To select the count to be
enabled follow the procedure described in chapter "7.5
Changing and saving parameters".
16
CLOCK
*09:33 L 05 MAR 97*
This function allows the setting of the current hour, minute, day,
month and year. To set the function follow the procedure
described in chapter "7.5 Changing and saving parameters".
Repeat the same procedure for all function data.
TEXT STAND-BY
This function allows the setting of the text that scrolls on the
display when the vending machine is on standby. To set the text
follow the procedure described in chapter "7.5 Changing and
saving parameters".
TEXT DISPENSING
DISPENSING
This function allows the setting of the text that scrolls on the
display when the vending machine is dispensing a drink. To set
the text follow the procedure described in chapter "7.5 Changing
and saving parameters".
TEXT OUT OF SERV
OUT OF SERVICE
This function allows the setting of the text that scrolls on the
display when the vending machine stops due to a fault. To set
the text follow the procedure described in chapter "7.5 Changing
and saving parameters".
PRESELECTION
YES
This function allows the enabling or not of drink price display.
The lower line of the display shows the set parameter. By
enabling this function (YES) the user is allowed by pressing the
key relating to a drink to visualize its price on the display. After a
few seconds the visualization is canceled. Press "ENTER" to
access this option.
PRESELECTION
->Y<- N
To set this option follow the procedure described in chapter "7.5
Changing and saving parameters".
SERIAL NUMBER
909024
It's the device registration number, set by the manufacturer,
and it can only be displayed.
CHANGE PASSWORD
This function allows the setting of a password (0000 base
setting) to prevent unauthorized personnel from directly
accessing programming functions. If a password is set, it shall a
ways be typed before accessing programming. Press "ENTER"
to access this option.
To Next Page
Loading...
