EasyManua.ls Logo

Saeco 3P - MANUAL OVERVIEW; Introduction; Used Symbols; MACHINE INFORMATION

Saeco 3P
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
1 - MANUAL OVERVIEW
2- MACHINE INFORMATION
1.1 Introduction
Important
This publication is an integral part of the vending machine
and should be read carefully. It contains the technical
information required for proper installation, maintenance
and operation of the D.A. 3P and 5P with clock module.
Always refer to this publication before performing any
operation.
Figures show the model D.A. 5P, but can also be referred
to the model D.A. 3P without substantial differences.
Manufacturer: Cosmec S.p.A.
Via Panigali, 39 - 40041 GAGGIO MONTANO (Bo)
In the internal part of the cover you will find the page with the
illustration most frequently referred to by the text. Keep it
open while you read the publication.
This publication should be kept with care and must
accompany the machine during the whole of its operating life,
including ownership changes.
In case this publication is lost or damaged, immediately ask
an AUTHORIZED SERVICE CENTRE for a new copy.
The Manufacturer owns all the copyrights of this publication.
1.2 Used symbols
Various types of indications were used in this publication with
the purpose of underlining the various danger or competency
levels. As a complement to the symbol a message is reported
explaining procedures and giving useful information:
2.1 User information
The vending machine is programmable as for the doses of
any type of vend.
The vending machine is pre-set to accommodate the
PARALLEL 1 2V coiner and the mechanic token coiner.
The vending machine is pre-set for the insertion of an
additional function (CLOCK MODULE) that allows start up or
shutdown programming.
In case of need refer to the national Importer or Distributor
or to the Manufacturer if the Importer is not available.
AUTHORIZED SERVICE CENTRES are available for any
clarification or information concerning vending machine
operation, or to satisfy spare part supply or technical
assistance demands.
The manufacturer reserves the right to carry out
improvements to the vending machine without prior notice.
2.2 Vending machine intended use
The vending machine D.A. 5P is capable of dispensing in a
completely automatic and programmable way:
- espresso coffee prepared with instantly ground bean coffee;
- drinks based on soluble lyophilized products (chocolate, milk,
tea, etc.)
- hot water for the preparation of hot drinks
The vending machine D.A. 3P is capable of dispensing in a
completely automatic and programmable way:
- espresso coffee prepared with instantly ground bean coffee;
- hot water for the preparation of hot drinks.
Danger
It's used to underline dangerous situations for
both the vending machine operators and the machine
itself.
Maintenance technician
It's used to mark out the operations that should
be performed only by specialized personnel.
Important
It's used to mark out the operations that
ensure good vending machine operation if
performed.
Important
In case of improper use any form of warranty
shall decay and the manufacturer shall disclaim all
responsibilities for damages to people and/or objects.
The following shall be considered improper uses:
- any use other than the one provided for and/or with
techniques different from the ones described in this
publication;
- any intervention on the vending machine in contrast with
the procedures described in this publication;
- any use after component tampering and/or after changes
to the safety devices;
- Installing the device outdoors
4

Related product manuals