Saeco 3P - Reset Counter

English
The number after the letter "T" corresponds to the total
performed vends, and cannot be zeroed.
The number after the letter "P" corresponds to the total vends
performed since the last zeroing, (partial total) and may be
zeroed with the "RESET" function.
COUNT.
T:
000000
COFFEE
P:
00000
Displays total and partial coffee vends.
COUNT. BEVERAGE
T:0000Z5 P:00015
Displays total and partial vends of all drinks, model D.A. 5P
dispensing keys A- B-C- D (ref. 3, fig. 17), model D.A. 3P
dispensing keys A - B - C (ref. 3, fig. 17). Press "ENTER" to
access the single counters.
BEVERAGE A
T:
000005
P:
000003
BEVERAGE B
T:
000005
P:
000003
BEVERAGE C
T:000005 P:000003
BEVERAGE D
T:000005 P:000003
BEVERAGE E
T:000005 P:000003
Using the "UP" and "DOWN" keys it's possible to visualize
total and partial vends for each single drink, model D.A. 5P
dispensing keys A - B - C - D (ref. 3, fig. 17), model D.A. 3P
dispensing keys A-B-C (ref. 3, fig. 17|.
COUNT. SOLUBLE
Counting function for soluble products only for model D.A.
5P|. Press "ENTER" to access the display of the single
counters.
SOLUBLE 1 T:000010
P:000004
Displays total and partial soluble product vends.
WATER COUNTER T:000010
P:000004
Displays total and partial water vends.
RESET COUNTER
This function allows zeroing all partial counters.
Press "ENTER" to access this option.
RESET COUNTER
->Y<- N
To set the function follow the procedure described in chapter
"7.5
Changing and saving parameters".
By confirming the etter "Y" the counters are zeroed.
STOP
This function allow the setting of a maximum number of drink
vends, quantity of soluble powder, or coffee grounds
disposals, in order to give a set frequency to the operations
or interventions. Once the set limits are reached, the vending
machine stops dispensing (block).
The red led on means that the drink is not available
(blocked). In the lower line, the first sequence of numbers
refers to the dispensed or expelled quantity of drinks or
product after the last zeroing; the second sequence of
numbers after "LIM:" indicates the maximum quantity to be
dispensed or expelled. To set the maximum number follow
the procedure described in "7.5 Changing and saving
parameters" With the second sequence of number set as
"LIM: 0000" dispensing is performed with no block limit.
Press "ENTER" to access the selection of the various blocks.
STOP COFFEE
00000 LIM:00000
This function allows the setting of a number of coffee vends
before blocking.
STOP BEVERAGE
This function allows to set the number of drink vends, model
D.A. 5P dispensing keys A - B - C - D (ref. 3, fig. 17), model
D.A. 3P dispensing keys A - B - C (ref. 3, fig. 17), before
blocking. Press "ENTER" to display the blocks for the single
drinks.
BEVERAGE A
00000 LIM:00500
BEVERAGE B
00000 LIM:00500
BEVERAGE C
00000 LIM:00500
BEVERAGE D
00000 LIM:00500
BEVERAGE E
00000 LIM:00500
Use the "UP" and "DOWN" keys to visualize the block
parameters for each single drink, model D.A. 5P dispensing
keys A - B - C - D (ref. 3, fig. 17), model D.A. 3P dispensing
keys A - B - C (ref. 3, fig. 17).
STOP SOLUB.
This function allows setting the dispensing of a certain
quantity of soluble powder: once this quantity is reached the
dispensing of all the drinks containing such soluble powder is
blocked., The counter drops by a unit only when a dose equal
to the one of the drink that uses its highest quantity is
dispensed. The use of a lower dose than the reference one is
counted as a fraction. Press "ENTER" to access soluble
product block display.
15