English
10
104
10 CLEANING AND MAINTENANCE
Before performing any
maintenance and/or
cleaning operation, turn off
the appliance by setting the
switches to the "OFF"
position. Disconnect the
appliance from the power
supply by removing the
plug from the socket and
wait for the appliance to
cool down.
The Manufacturer is not
liable for damage or
malfunctions caused by a
wrong or lack of
maintenance.
Never perform any cleaning
operation when the machine
is in “standby” mode.
Do not use direct water
jets.
In case of faults,
immediately turn off the
appliance, disconnect it
from the power supply by
removing the plug from
the socket and contact the
nearest service centre.
10.1 General Notes for Correct
Operation
Non-removable
components and the
machine itself must be
cleaned, when not
differently specified, only
by using cold or lukewarm
water, with a non-abrasive
sponge and a damp cloth.
Never use direct water
jets. Wring the damp cloth
or the sponge before using
it to clean the appliance.
All parts requiring cleaning are easily accessible, so no
tools are needed.
To Next Page
Loading...
