Saeco CAP020B - Installation; 5.1 Cautions

English
5
75
5 INSTALLATION
5.1 Cautions
The appliance cannot be
installed in external areas.
Avoid installing it in areas
where the temperature is
lower than +2°C or higher
than 32°C and in
particularly humid or dusty
places. It should neither be
installed in places where
water jets are used for
cleaning operations nor
where there is a risk of fire
or explosion.
Make sure that the installation place is compatible with the
following specifications, before unpacking the appliance:
• the electric socket or the all-pole switch which the
appliance is connected to must be easily accessible for the
user, so that the user will easily disconnect the machine
from the electric mains when necessary;
• the socket voltage must correspond to that indicated on
the appliance data plate.
• the gradient of the supporting surface should NOT
exceed 2°;
Check that the size and
strength of the surface
where the machine is
installed are appropriate to
safely bear it.
For a correct and
ergonomic use of the
machine, it is
recommended to install it
onto a surface which is at
least 1 m high.
The appliance must be
installed on a horizontal
surface.
The appliance must only be installed in places where it can
be used and serviced by qualified staff only.