41
English
Fig.35
10 - VARIATIONS “DA 10P STANDARD”
10.1 General description
Like the version “PLUS”, the “DA 10P STANDARD” dispenses beverages
using both soluble products and coffee beans. However, it is possible to use
only three different types of soluble products instead of five (as in the
“PLUS” version). Bins 1 and 2 are not available. Bins ref. 3-4-5-C (Fig. 35)
are available.
10.2 Component variances
The following components are not available with the “DA 10P STAN-
DARD”:
• no. 2 soluble product bins ref. 4 (Fig. 0)
• no. 2 whipper systems
10.3 Operating variances
The operating variances of the “DA 10P STANDARD” are the following:
• In the programming mode of the “BEVERAGE PREPARATION” menu
(message “SEQUENCE”) three soluble products are programmable in-
stead of the five available in the “PLUS” version. For example:
- PLUS version
BEVERAGE FBEVERAGE F
BEVERAGE FBEVERAGE F
BEVERAGE F
SEQUENCE: C235SEQUENCE: C235
SEQUENCE: C235SEQUENCE: C235
SEQUENCE: C235
- STANDARD version
BEVERAGE FBEVERAGE F
BEVERAGE FBEVERAGE F
BEVERAGE F
SEQUENCE: 345CSEQUENCE: 345C
SEQUENCE: 345CSEQUENCE: 345C
SEQUENCE: 345C
• If decaffeinated soluble coffee is going to be used, the decaffeinated pre-
selection button ref. 6 (Fig. 23) must be programmed and decaffeinated
soluble coffee must be filled in the corresponding bin ref. 5 (Fig. 35) as
stated in section 4.14.
To Next Page
Loading...
