Saeco Moltio - Automatic Rinse;Self-Cleaning Cycle; Manual Rinse Cycle

14 ENGLISH
Automatic rinse/self-cleaning cycle
When warm-up is completed, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1
Place a container under the co ee dispensing spout to catch the small
amount of water which will be dispensed.
2
The machine shows this display. Wait for the cycle to  nish automati-
cally.
Note:
You can stop dispensing by pressing the “
” button.
Yellow
Green
3
When the above steps have been completed, the machine shows this
display. You can now proceed with the manual rinse cycle.
Manual rinse cycle
During this process you activate the co ee brewing cycle and fresh water
 ows through the water circuit. This takes a few minutes.
1
Place a container under the co ee dispensing spout.
2
Check that the machine shows this display.
Green