EasyManua.ls Logo

Saeco Moltio - Hot Water Dispensing

Saeco Moltio
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
ENGLISH
45
Green
7
The following icon is displayed during pre-heating time required by
the machine.
8
When the desired amount of frothed milk is reached, press the
button.
Now the “frothed milk button is programmed. Every time it is pressed, the
machine will brew the same amount of frothed milk that was programmed.
HOT WATER DISPENSING
Warning:
Danger of scalding! Dispensing may be preceded by sprays of hot wa-
ter and steam. Danger of burns! Wait until the end of the cycle before
removing the water dispensing spout.
1
Slightly tilt the water dispensing spout and then insert it all the way in
into the guides of the machine.
2
Push the water dispensing spout towards the bottom while rotating at
the same time, until it is locked in the machine as shown in the  gure.
Yellow
Green
6
The machine reminds you to insert the carafe and pull out the milk
carafe dispenser.

Table of Contents

Other manuals for Saeco Moltio

Related product manuals