EasyManua.ls Logo

Saeco Moltio - OPERATING THE MACHINE; Changing Coffee Beans and Selection

Saeco Moltio
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
ENGLISH
Yellow Green
5
To exit, press the button. Now the machine is ready to brew.
The machine is now programmed to manage a new  lter.
Note:
If the “INTENZA+” water  lter is already installed and you want to remove
but not replace it, select the “OFF” option instead.
If there is no “INTENZA+” water  lter installed, insert the small white  lter
previously removed into the water tank.
CHANGING COFFEE BEANS
The machine comes with a removable co ee bean hopper so you can
switch easily from one type of co ee bean to another and enjoy a di erent
co ee taste.
Note:
You can buy an additional co ee bean hopper as accessory (CA6803).
To preserve it’s taste you can store co ee beans in the bean hopper in the
refrigerator.
Removing the co ee bean hopper
To remove the co ee bean hopper follow the steps below:
1
Turn the selector to the position.
Caution:
It may happen that the selector can not be switched as it is blocked by
co ee beans. In this case move the selector back and forth until the
beans are released.

Table of Contents

Other manuals for Saeco Moltio

Related product manuals