69
ENGLISH
69
25
Remove and empty the container
26
Empty the drip tray and place it back.
27
The descaling cycle is now complete.
28
Remove the small white water lter and place back the “INTENZA+”
water lter into the water tank if it was installed.
Note:
At the end of the descaling cycle, wash the brew group as described in the
“Weekly Cleaning of the Brew Group” chapter.
The two rinse cycles are performed in order to have the circuit cleaned
with a preset amount of water and ensure proper machine operation. If the
water tank is not lled up to MAX level, the machine might require three or
more cycles.
PROGRAMMING
You can adjust the machine functions to your personal preference by ac-
cessing the program menu.
The following parameters can be adjusted
Co ee temperature
This function allows you to adjust the co ee brewing temperature.
Yellow
Co ee bean selection
This function allows you to optimize the grinding for selected type of cof-
fee bean.
2
1
1
Co ee duct emptying cycle.
This function allows you to empty the co ee duct and grinder before
changing co ee beans.
YellowYellow
To Next Page
Loading...
