70
ENGLISH
YellowYellow YellowYellowYellowYellow
"INTENZA+" Water Filter
This function allows you to manage the “INTENZA+” water lter.
For more details, see the chapter related to lter handling.
Descaling cycle
This function allows you to run the descaling cycle.
Timer (stand-by)
This function allows you to adjust the time the machine will go into stand-
by mode after the last brewing.
Factory Settings
This function allows you to reset all factory values.
Contrast
This function allows you to adjust the contrast of the display to better view
the messages.
Water hardness
This function allows you to adjust the water hardness setting according to
the area where you live.
1 = very soft water
2 = soft water
3 = hard water
4 = very hard water
For more details please see the “Measuring and Programming Water Hard-
ness” chapter.
To Next Page
Loading...
