Saeco Moltio - Replacing the INTENZA+ Water Fi Lter

21 ENGLISH 21
10
Press the “ ” button to select “ON” and press the “ ” button to con-
 rm.
Yellow
Replacing the “INTENZA+” water  lter
When the “INTENZA+” water  lter needs to be replaced with a new one, the
following icon is displayed.
1
Replace the “INTENZA+” water  lter as described in the previous chap-
ter.
Yellow
11
To exit, press the “ ” button. Now the machine is ready to brew.
In this way the machine has been programmed to inform the user of
the need to replace the “INTENZA+” water  lter.
GreenYellow
3
Press the “ ” button to access the programming menu. Scroll the
pages by pressing the “
” button until the following icon is displayed.
4
Select the “RESET” option. Press the " " button to con rm.
Green
2
Press the “ ” MENU button. The machine shows this display.