63
ENGLISH
63
1
Place a container under the co ee dispensing spout.
2
Make sure the water tank is lled with fresh water up to the “MAX”
level.
3
Put a “Co ee Oil Remover” tablet in the pre-ground co ee compart-
ment.
4
Press the “ ” button one or more times to select the pre-ground cof-
fee function. Do not add ground co ee.
5
Press the “ ” button to start a co ee brewing cycle.
6
Wait until the machine has dispensed half a cup of water.
7
Switch the power button on the back of the machine to “0”.
Green
To Next Page
Loading...
