Saeco Moltio - Page 68

66 ENGLISH
2
Insert the empty milk carafe.
3
Remove the “INTENZA+” water  lter from the water tank if it was in-
stalled and replace it with the small white original one. Place the water
tank back into the machine.
5
Press the “ ” button. Press the “ ” button until the following display is
shown.
6
Press the “ ” button to start the descaling process.
7
The machine reminds you to insert the carafe and pull out the milk
carafe dispenser.
Note:
if you press the “
” button by mistake, press the “ ” button to quit.
8
Remove the water tank and pour the entire content of the descal-
ing solution. Then  ll the water tank with fresh water up to the CALC
CLEAN level.
9
Place the water tank back into the machine.
Yellow Yellow Green
4
Press the “ ” MENU button. The following icon is displayed.
Green