EasyManua.ls Logo

Saeco SUP040 E RB - Page 49

Saeco SUP040 E RB
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
US English
8
49
MENU ITEM Description
Prebrewing
Pre-brewing:
coffee is slightly dampened before brewing so as to bring out the full aroma of the coffee
that acquires an excellent taste.
Off pre-brewing is not performed.
Low active.
High longer in order to bring out the coffee taste.
COFFEE TEMPERATURE This section allows the coffee brewing temperature to be adjusted
Low lowest brewing temperature
Normal standard brewing temperature
High highest brewing temperature
COFFEE LENGTH
This section allows you to program the amount of coffee to be brewed for each selected
beverage.
The bar allows you to set the exact amount of coffee to be brewed (the value is
measured in turbine pulses).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
MILK QUANTITY
This setting can only be adjusted for beverages containing milk and allows you to
program the amount of milk dispensed for each selected beverage.
The bar allows you to set the exact amount of milk to be dispensed (the value is
measured in seconds).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
Pause
This value between 0 and 60 secs - if different from zero - performs a pause of the value set in seconds to
stratify the milk before brewing the coffee.
High Speed Milk
This setting can only be adjusted for beverages containing milk and allows the machine to dispense milk and
coffee at the same time.
Off
Milk and coffee are dispensed in two separate steps.
NOTE:
in this case, the various dispensing stages (coffee or milk) can be individually stopped.
On
Milk and coffee are dispensed at the same time.
NOTE:
in this case, the user can only stop dispensing the beverage as a whole.
Setting ECOMODE to OFF brings down the dispensing time of mixed products.
Default
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
Latte Macchiato To manage the Latte Macchiato beverage brewing parameters.
Prebrewing
Pre-brewing:
coffee is slightly dampened before brewing so as to bring out the full aroma of the coffee
that acquires an excellent taste.
Off pre-brewing is not performed.
Low active.
High longer in order to bring out the coffee taste.
COFFEE TEMPERATURE This section allows the coffee brewing temperature to be adjusted
Low lowest brewing temperature
Normal standard brewing temperature
High highest brewing temperature
COFFEE LENGTH
This section allows you to program the amount of coffee to be brewed for each selected
beverage.
The bar allows you to set the exact amount of coffee to be brewed (the value is
measured in turbine pulses).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu

Table of Contents

Related product manuals