US English
8
50
MENU ITEM Description
MILK QUANTITY
This setting can only be adjusted for beverages containing milk and allows you to
program the amount of milk dispensed for each selected beverage.
The bar allows you to set the exact amount of milk to be dispensed (the value is
measured in seconds).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
Pause
This value between 0 and 60 secs - if different from zero - performs a pause of the value set in seconds to
stratify the milk before brewing the coffee.
High Speed Milk
This setting can only be adjusted for beverages containing milk and allows the machine to dispense milk and
coffee at the same time.
Off
Milk and coffee are dispensed in two separate steps.
NOTE:
in this case, the various dispensing stages (coffee or milk) can be individually stopped.
On
Milk and coffee are dispensed at the same time.
NOTE:
in this case, the user can only stop dispensing the beverage as a whole.
Setting ECOMODE to OFF brings down the dispensing time of mixed products.
Default
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
HOT WATER To manage the Hot water beverage dispensing parameters.
WATER QUANTITY
This setting can only be used to adjust Hot Water and allows you to program the
amount of water to be dispensed each time the corresponding button is pressed.
The bar allows you to set the exact amount of water to be dispensed (the value is
measured in turbine pulses).
Default
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
milk To manage the Milk beverage dispensing parameters
MILK QUANTITY
This setting can only be adjusted for beverages containing milk and allows you to
program the amount of milk dispensed for each selected beverage.
The bar allows you to set the exact amount of milk to be dispensed (the value is
measured in seconds).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
Default
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
EXTRA To adjust the parameters of the Extra beverages.
LARGE COFFEE To manage the Large Coffee beverage brewing parameters
Prebrewing
Pre-brewing:
the coffee is slightly dampened before brewing so as to bring out the full aroma of the
coffee and to acquire an excellent flavour
Off pre-brewing is not performed.
Low active.
High longer in order to bring out the coffee taste.
COFFEE TEMPERATURE This section allows the coffee brewing temperature to be adjusted
Low lowest brewing temperature
Normal standard brewing temperature
High highest brewing temperature
To Next Page
Loading...
