US English
10
94
Press the "OK" button to access the brew group cleaning
cycle.
Press the "OK" button to access.
Press the "OK" button to start the brew group cleaning
cycle.
Open the service door with the supplied key.
Remove the brew group by pulling it by the handle and
pressing the «PRESS» button.
Press the "OK" button to confirm the removal of the brew
group.
If this option is confirmed,
the cycle must be
completed. Press the "ESC"
button to exit.
Place the cleaning tablet in the brew group and refit the
group in the machine, making sure that all the components
have been inserted and that the door is closed.
To Next Page
Loading...
