US English
10
95
After placing the tablet in the brew group, press the "OK"
button to confirm.
Place a container under the coffee dispensing spout and
press the "OK" button to confirm.
Put the brew group back into the machine and press the
"OK" button to confirm.
The machine completes the cycle automatically.
At the end of the cycle,
after performing the rinse
cycle, the machine goes
back to its normal
operating mode.
It is recommended to
remove the group and wash
it under fresh running water.
Ensure that the brew
group is completely dry
before putting it back into
the machine.
10.2.10 Brew group lubrication
Lubricate the brew group after approximately 500 cups of
coffee or once a month.
The grease to lubricate the brew group and the complete
"Service Kit" can be purchased at your local dealer or at
authorised service centres.
To see how many coffees
have been dispensed, open
the "PRODUCT
COUNTERS" menu in the
"STATISTICS" menu of the
technical menu (see
"Description of Messages in
the Programming Menu"
section).
Before lubricating the brew group, clean it under running
water as described in the "Brew Group Cleaning" chapter.
Lubricate the brew group guides using Saeco grease only.
To Next Page
Loading...
