TS7000 MATERIAL HANDLER OPERATORS MANUAL - VERSION I
Page 7
Under Carriage: This is the current under carriage and can be represented by the following:
outrigger picture with the outrigger length
or picture of a tyre with the crane travel speed or description
Tracks with extended or retracted measurement
Radius: This is the measurement from the centre
line of rotation to the end of the stick.
Radius: This is measurement from the ground to the end of the stick.
Lifted Load: This is the load on the hook at the present time, if the green
light and the load are flashing it is a tare load (the tare has been pressed).
Rated Capacity: This is the load allowed to be picked up with the selected
configuration at the current radius and height as specified by the manufacturer.
Boom Angle: This displays the boom angle.
Stick Angle: This displays the stick angle.
Utilisation: Percentage utilisation is the percentage of rated load used by
the current lifted load.
Date & Time: This is the current date and time.
To Next Page
Loading...