Sage SIP - SVA05 LP Low Pressure Isolation Valve Assembly

To Next Page

To Previous Page

O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l

S A G E M E T E R I N G , I N C .

REV. 16-SIP/SRP

Teflon Ferrule

16SS Compression Fitting

316SS 3/4

x 1-1/2

Pipe Nipple

8.00"

with

threadolet

7.00"

with

threadolet

HANDLE IN CLOSED POSITION HANDLE IN OPEN POSITION

3/4" Brass Full Port Ball Valve

1/2"-3/4" Brass Adaptor

5.5"

without

threadolet

6.5"

with

threadolet

Valve Handle

Customer

Supplied Threadolet

SVA05LP Low Pressure Isolation Valve Assembly

NOTES AND CAUTIONS

• Suitable for low pressure Air or Natural Gas applications

(maximum 50 PSIG)

• Assumes

⁄2" Insertion Probe inserted to center of a Pipe

(see Sage Probe Insertion Guidelines)

• Teﬂon Ferrule permits ease of Probe insertion or removal

• Exercise caution when loosening Ferrule nut during

insertion and removal of Probe, since this model has no

Safety Chain

• Note, maximum upward force is 20% of pipe pressure

(i.e., 10 Lbs with 50 PSIG)

• The Assembly will be shipped with a plastic sleeve that

protects the 3/4" pipe nipple

• It is the Customer’s responsibility to weld a Female Threadolet

with correct diameter to pipe