S A G E M E T E R I N G , I N C .
O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
52
REV. 16-SIP/SRP
RETURN MATERIAL AUTHORIZATION R
MA #
Date
R
ETURN CUSTOMER INFORMATION
Customer’s Name Fax #
Customer’s Contact Name Phone #
Email Address
CUSTOMER’S RETURN ADDRESS
Bill to: Ship to:
RETURN PRODUCT INFORMATION
Model No. Serial No(s).
FLOW: MIN NORMAL MAX
TEMP: MIN NORMAL MAX
PRESSURE: MIN NORMAL MAX
GAS LINE SIZE
REASON FOR RETURN / DESCRIPTION OF SYMPTOMS
(All non-warranty repairs could be subject to a minimum evaluation charge)
Recommended steps to be used to duplicate problem/symptoms
Sage Metering Technical Contact
Take special care when packaging your meter for return to the factory. The sensor in particular may easily
be damaged if not prevented from shifting around within the package and if the sensor itself is not cov-
ered to keep it from contacting other package contents. Any damage resulting from improper packaging
is the responsibility of the shipper.
SAGE METERING, INC.
8 Harris Court, Building D-1 / Monterey, California 93940
PHONE: 831-242-2030 / FAX: 831-655-4965
To Next Page
Loading...