19
3270360_GB
POSITIVE QUICK COOLING LED
It is on during positive blast chilling and blinking during selection
NEGATIVE QUICK COOLING LED
It is on during negative blast chilling and blinking during selection
HARD
HARD QUICK COOLING LED
It is on during hard chilling, blinking during selection, and on when the
function is not active
CORE PROBE LED
It is on during a core probe cycle and blinking during selection or when
warning that the needle is not inserted
TIME LED
It is on during a time-controlled cycle and blinking during selection
STORING LED
It is on during the stage after blast chill preservation and blinking during the
cycle when the compartment probe is displayed
DEFROST LED
It is on during defrosting and blinking during dripping
LED PRE-COOLING
It is on or blinking during the pre-cooling cycle
ON/OFF LED
It is on when the card is set to stand-by; it is off in any other state of the card
FAHRENHEIT LED
Temperature is measured in Fahrenheit degrees
CELSIUS LED
Temperature is measured in Celsius degrees
To Next Page
Loading...
Need help?
General
