Sagi DF41M User Manual

23
3270360_GB
Press the
key to start the cycle
The , and icons remain steady: the test is run to verify the
insertion of the core probe
The cycle is run when the test is completed successfully; otherwise, a time-
controlled negative soft chilling cycle will start. The , , and icons
remain on
TIME-CONTROLLED POSITIVE SOFT QUICK COOLING CYCLE
WARNING: not insert the needle probe correctly to run a time-controlled cycle.
CHILL
Press the
CHILL
key to select a core probe positive Soft QC
The and icons blink
The display shows the room probe temperature setpoint during QC
Press the
key to start the cycle
The and icons remain steady: the test is run to verify the insertion of
the core probe
As the needle probe is not inserted, the test is not completed successfully and
the time-controlled cycle is launched
The and icons remain steady
The display shows the remaining time of the cycle
Press or to change the value
Use the e keys to change the value
TIME-CONTROLLED POSITIVE HARD QUICK COOLING CYCLE
WARNING: not insert the needle probe correctly to run a time-controlled cycle.
CHILL
Press the
CHILL
key to select a core probe positive Soft QC
The and icons blink
HARD
Press the
HARD
key to select a core probe positive Hard QC
The
HARD icon blinks
The display shows the room probe temperature setpoint during QC
Press the
key to start the cycle
The , and HARD icons remain steady: the test is run to verify the
insertion of the core probe

Sagi DF41M Specifications

General

Brand	Sagi
Model	DF41M
Category	Freezer
Language	English