Sagi DF41M User Manual

21
3270360_GB
PRE-COOLING CYCLE
It is advisable to run a cooling cycle prior to selecting any slaughter cycle.
CHILL
Press
CHILL
for 1 sec to run the pre-cooling cycle
The icon blinks
The pre-cooling cycle continues once the temperature of -25 °C is reached in the chamber, the § remains
steady, and the buzzer is activated for 1 sec.
CORE PROBE POSITIVE SOFT QUICK COOLING CYCLE
WARNING: insert the needle probe correctly to run a temperature-controlled cycle.
CHILL
Press the
CHILL
key to select a core probe positive Soft QC
The and icons blink
The display shows the room probe temperature setpoint during QC
Press or within 15 seconds to change the value
Use the and keys to change the value
Press the
key to start the cycle
The and icons remain steady: the test is run to verify the insertion of
the core probe
The cycle is run when the test is completed successfully; otherwise, a time-
controlled positive soft chilling cycle will start. The and icons remain on.
CORE PROBE POSITIVE HARD QUICK COOLING CYCLE
WARNING: insert the needle probe correctly to run a temperature-controlled cycle.
CHILL
Press the
CHILL
key to select a core probe positive Soft QC
The and icons blink
HARD
Press the
HARD
key to select a core probe positive Hard QC
The
HARD icon blinks
The display shows the room probe temperature setpoint during QC
Press or within 15 seconds to change the value
Use the e keys to change the value

Sagi DF41M Specifications

General

Brand	Sagi
Model	DF41M
Category	Freezer
Language	English