Chapter 2: Installation
4 Unpacking
2.1 Unpacking
2.1.1 Initial inspection
Inspect the shipping carton immediately upon receipt for evidence of damage
during transport. If the shipping carton is severely damaged or water stained,
request that the carrier's agent be present when opening the carton. Save the
carton packing material for future use.
After unpacking the system, inspect it thoroughly for damage and loose
components or fittings. If the contents are incomplete, if there is mechanical
damage or defect, or if the system does not work properly, notify your dealer.
2.1.2 Storage
The Control Panel may be stored or shipped in temperatures between -30° C
and +80° C. Protect the Control Panel from extreme temperature variation
which can cause condensation.
Warning! To avoid electric shock, do not apply power to the
system if there is any sign of shipping damage to any
part of the front or rear panel or the outer cover. Read
the safety summary at the front of this manual before
installing or operating the system.
ControlPanel.book Page 4 Thursday, January 3, 2013 12:28 PM
To Next Page
Loading...
