VHF 5000 System Functional unit workshop service
3-49
3.5 Servicing the SB5006 service tool and LB5007 LAN box
The SB5006 service tool supports all VHF series 5000 products, that is either configurable (transceivers), or can
be updated with new software (transceivers and remote control units).
To always assure the tool is optimal for servicing the SAILOR products it need to be upgraded to exploit service
of the newest features available with the VHF series 5000 products.
The LB5007 shall only be installed if a printer is installed. The hardware and the software inside the LB5007 are
identical to the SB5006 Service tool.
3.5.1 Software
The SB5006 hardware is released as two different platforms.
• Platform 1 is covered by software releases up to version 1.08
• Platform 2 is covered by software releases from version 2.08 and up
NOTE: The LB5007 LAN box is built on platform 2 only.
To determine which version of the service tool is regarded, simply power it up and check the Service Tool frame
on the front page. Below is shown the example for a platform 2.
LANBOX
169.254.86.86
Version 2.08
on Platform 2
The SB5006 software will be released on a regular basis on the extranet. We strongly recommend to upgrade
for platform 2, as support for platform 1 solutions will not continue.
3.5.2 Manuals
SB5006 operation is covered in the SB5006 service tool operations manual. Please keep this updated along
with your tool update.
3.5.3 Service concept
The service concept for the SB5006 unit is replacement only.
0608
To Next Page
Loading...
Need help?
General
