9. Temperature Units of Measure (default: °F):. Press the
SET key again to change the temperature units of measure.
Press the CHANNEL/+ key or MIN/MAX/- key to switch
between °F and °C units of measure.
10. Wind Speed Units of Measure (default: mph). Press the
SET key again to change the wind speed units of measure .
Press the CHANNEL/+ key or MIN/MAX/- key to toggle the
wind speed units between m/s, bft,knots,mph or km/h.
11. Rainfall Units of Measure (default: inch). Press the SET
key again to change the Rainfall units of measure. Press
CHANNEL/+ key or MIN/MAX/- key to toggle the rainfall units
between mm and inch.
12. Barometric Pressure Display Units(default: InHg).
Press the SET key again to change the pressure units of
measure. Press the CHANNEL/+ key or MIN/MAX/- key to
toggle the pressure units between mmhg, inHg or hPa.
13. Pressure Threshold Setting (default level 2). Press the
SET key again to change the pressure threshold. Press the
CHANNEL/+ key or MIN/MAX/- key to change pressure
threshold 2 hPa to 4 hPa. (For detailed information of this part
please refer to 10.5)
14. Weather Icons Setting (default: partly cloudy). Press
the SET key again to change the initial weather icon. Press the
CHANNEL/+ key or MIN/MAX/- key to select the initial weather
icon of Sunny, Cloudy, Partly Cloudy or Rainy. (For detailed
information of this part please refer to 10.2)
15. Location Division. (default: Northern Hemisphere).
Press the SET key again to change the location division. Press
the CHANNEL/+ key or MIN/MAX/- key to toggle the position
To Next Page
Loading...
