SAJ H1 Series - Inverter System Main Interface

H1 Series
- 40 -
Please Set Grid Country!
country 1
Australia
Austria
Belgium
Brazil
Denmark
Finland
France
Luxembourg
Netherland
NBR_16149
NBR_127V
Figure 6.7 Country setting（Country with multiple compliances）
Noted: If users cannot find out the corresponding country, please stop the
setting and contact the after sales for confirmation.
6.2.5 Inverter System Main Interface
After the country has been set, system will reset and show main interface, as
show below. (Standby mode).
Energy Direction
2019-09-16 18:26:31
Figure 6.9 Main Interface
If system running normally, main screen will show the power flowing
illustration, as show below.