SAJ H1 Series - Page 48

H1 Series
- 47 -
The figure below shows the PV parameter while selecting the PV panels：
2019-09-16 18:26:31
Graph Setting Run-Info About
PV1 Voltage: 330.2V
PV1 Power: 660.4W
PV2 Voltage: 330.2V
PV2 Current: 2.00A
PV2 Power: 660.4W
PV1 Current: 2.00A
Figure 6.27 PV parameter
In the main edit interface, by selecting inverter icon, press ENT button to
show the inverter running information:
2019-09-16 18:26:31
Graph Setting Run-Info About
App Mode: Smart Home Mode
Inverter State: Standby State
Temperature: 36.5℃
BUS Voltage: 384.2V
Charge State: Disable
DisCharge State: Disable
OutPut State: Disable
Sell Execess Energy: Disable
AmbtempC: 36.5℃
Figure 6.28 Information of inverter running
In main edit interface, by selecting Grid icon, press ENT button to show the
inverter output information:
2019-09-16 18:26:31
Grid Voltage: 220.8V
Grid Power: 225W
Grid Frequency: 49.7Hz
Grid Current: 1.02A
Graph Setting Run-Info About
Meter Power: 0W
Figure 6.29 Information of inverter output
In main edit interface, by selecting battery icon, press ENT button to show