SAJ H1 Series - Page 49

H1 Series
- 48 -
the inverter battery information. (The figure below shows the Li-ion battery)
2019-09-16 18:26:31
Graph Setting Run-Info About
Device Name: PHANTOM-S
Trade Name:
Battery Type: LiFePo4
Total Capacity: 100Ah
Capacity Percent: 100%
Pack Num: 2
Battery Voltage: 50.5V
Battery Current: 20.1A
Temperature : 34.0℃
Figure 6.30 Information of Li-ion battery
Graph Setting Run-Info About
2019-09-16 18:26:31
Battery Type: Lead-acid Battery
Battery Current: 1.01A
Total Capacity: 100Ah
Battery Voltage: 50.5V
Battery Power: 51W
Figure 6.31 Information of Lead-acid battery
In main edit interface, by selecting load icon, press ENT button to show the
load output information.
2019-09-16 18:26:31
Out-Voltage: 220.2V
Out-Curret: 1.00A
Out-power： 200W
Out-ApparentPower：220VA
Out-Frequency: 49.9Hz
Graph Setting Run-Info About
Figure 6.32 Information of load output
Select the “Run-Info” in menu, press ENT to enter the secondary menu, then
select “Error Records”, press ENT to enter error and warning, as shown
below: