To Next Page

To Previous Page

R6 Series

- 28 -

Chapter 5 Electrical Connection

5.1 Safety Instruction for Hot-line Job

Electrical connection must only be operated on by professional technicians. Please keep in

mind that the inverter is a bi-power supply equipment. Before connection, necessary

protective equipment must be employed by technicians, including insulating gloves,

insulating shoes and safety helmet.

DANGER

· Dangerou s to life due to potential fire or electricity shock.

· When power -on, the equipment should be in conformity with national rules and regulations.

· The direct connection between the inverter and high voltage power systems must be operated by qualified tech nicians

in accordance with local and national power grid standards and regulations.

WARNING

· When the PV array is exposed to light, it supplies a DC voltage to the inverter.

NOTICE

· Electrical connection should in conformity with proper stipula tions, such as stipulations for cross-sectional area of

conductors, fuse and ground protection.

· The overvoltage category on DC input port is II, on AC output port is III.

Questions and Answers:

Need help?

Do you have a question about the SAJ R6 Series and is the answer not in the manual?

SAJ R6 Series Specifications

General

Category	Inverter
Number of MPPTs	2
Protection Rating	IP65
THDi	< 3%
Cooling	Natural Convection
Communication	RS485, Wi-Fi, Ethernet
Rated AC Voltage	230V
AC Voltage Range	180 V - 280 V
Rated Grid Frequency	50 Hz / 60 Hz
Power Factor	0.8 leading - 0.8 lagging
DC Switch	Integrated
Protection	DC Reverse Polarity Protection, AC Short Circuit Protection
Operating Temperature Range	-25°C to 60°C