SAJ R6 Series User Manual

R6 Series
- 36 -
1. Connection port
Figure 5.9 Connect the inverter
5.5 Communication Connection
R6 inverter is standardly equipped with a RS485 interface and a RS232 interface.
Figure 5.10 RS485 pin
Pin Number
Description
Function
1
NC
2
GND_W
Ground wire
NOTICE
· Before inserting the connector into DC input terminal of the inverter, please make su re that
the DC switch of the inverter is OFF.
·Please use the original terminal to install.

SAJ R6 Series Specifications

General

Category	Inverter
Number of MPPTs	2
Protection Rating	IP65
THDi	< 3%
Cooling	Natural Convection
Communication	RS485, Wi-Fi, Ethernet
Rated AC Voltage	230V
AC Voltage Range	180 V - 280 V
Rated Grid Frequency	50 Hz / 60 Hz
Power Factor	0.8 leading - 0.8 lagging
DC Switch	Integrated
Protection	DC Reverse Polarity Protection, AC Short Circuit Protection
Operating Temperature Range	-25°C to 60°C