SAJ R6 Series User Manual

R6 Series
- 32 -
Code
Name
A
DC Switch
B
Decompression Valves
C
DC Input
D
RS232 Communication (GPRS/ Wi-Fi /4G)
E
Ground Connection
F
RS485 Communication
G
Terminal Block
5.3 AC Connection
Table 5.3 Specifications for interface
Model
Cross-sectional area of cables（mm²）
Recommender
additional grounding
cable size （mm²）
Scope
Recommended
value
R6-
15K/17K/20K/22K/25K-T
2-32
R6-5K/6K/8K/10K/15K-T2-
32
-LV
10.0-16.0
16.0
10
R6-25K/30K/33K/36K-T3-32
R6-20K-T3-32-LV
16.0-35.0
25.0
16
R6-36K/40K/50K-T4-32
R6-25K/30K-T4-32-LV
16.0-35.0
25.0
16
Table 5.4 Recommended power grid connecting cable and additional grounding cable specification
Note: If the grid-connection distance is too far, please select AC cable with larger diameter
as per the actual condition.
5.3.1 AC side Electrical Connection
1. Ground of the inverter. After penetrating the external hex head screw through
OT terminal of the grounding line, screw in the grounding port of enclosure of the
inverter in clockwise direction and make sure it’s screwed up tightly.

SAJ R6 Series Specifications

General

Category	Inverter
Number of MPPTs	2
Protection Rating	IP65
THDi	< 3%
Cooling	Natural Convection
Communication	RS485, Wi-Fi, Ethernet
Rated AC Voltage	230V
AC Voltage Range	180 V - 280 V
Rated Grid Frequency	50 Hz / 60 Hz
Power Factor	0.8 leading - 0.8 lagging
DC Switch	Integrated
Protection	DC Reverse Polarity Protection, AC Short Circuit Protection
Operating Temperature Range	-25°C to 60°C