SAJ R6 Series User Manual

R6 Series
- 48 -
AC Voltage Error
·Check the volt . of the grid
·Check the connection between the inverter and the grid.
·Check the settings of the on -grid standards of the inverter.
·If the volt . of the grid is higher than the volt. regulated by
local grid, please inquire the local grid workers whether they
can adjust the volt. at the feed point or change the value of the
regulated volt.
·If the volt . of the grid is in regulated range as allowed and
LCD still in this error, please contact your distributor or call

SAJ R6 Series Specifications

General

Category	Inverter
Number of MPPTs	2
Protection Rating	IP65
THDi	< 3%
Cooling	Natural Convection
Communication	RS485, Wi-Fi, Ethernet
Rated AC Voltage	230V
AC Voltage Range	180 V - 280 V
Rated Grid Frequency	50 Hz / 60 Hz
Power Factor	0.8 leading - 0.8 lagging
DC Switch	Integrated
Protection	DC Reverse Polarity Protection, AC Short Circuit Protection
Operating Temperature Range	-25°C to 60°C