■
Logistic fee: Cost of delivery, tariff and other derived expense when defective
products are sent from user to SAJ or/and repaired products are sent from SAJ to
user.
1.6 Exclusion of Liability
Any defect caused by the following circumstances will not be covered by the
manufacturer’s warranty (the Dealers or Distributors are responsible and authorized
by SAJ for the following investigation):
◆ “Warranty Card” not being sent back to Distributor/Dealer or SAJ;
◆ Product modified, parts replaced or attempt to maintain;
◆ Changes, or attempted repairs and erasing of series number or seals by non SAJ
technician;
◆ Incorrect installation or commissioning;
◆ Failure to comply with the safety regulations (VDE standards, etc.);
◆ The inverter has been improperly stored and damaged while being stored by the
Dealer or the end user;
◆ Transport damage (including scratch caused by movement inside
packaging during shipping).A Claim should be made directly to shipping
company/insurance Company as soon as the container/packaging is unloaded and
such damage is identified;
◆ Failure to follow any / all of the user manual, the installation guide and the
maintenance regulations;
◆ Improper use or misuse of the inverter;
◆ Insufficient ventilation of the inverter;
◆ Influence of foreign objects and force majeure (lightning, grid overvoltage,
severe weather, fire, etc.)
To Next Page
Loading...
Need help?
General
