SAJ Sununo-TL Series Installation Manual

6
Sununo-TL1.5K/2K Sununo-TL3KB/4KB
Sununo-TL3KA/4KA Sununo-TL5K
Figure 3.3
2) Drill 6 holes in the wall (in conformity with position marked in above picture), and then
place expansion tubes in the holes using a rubber hammer.
Figure 3.4
3) Mount the rear panel.
Wring six screws into the expansion tubes and tightly mount the rear panel on the wall.

SAJ Sununo-TL Series Specifications

General

Brand	SAJ
Model	Sununo-TL Series
Category	Inverter
Language	English