Section 1
Unload Station (Figure 1-O)/Unload Trays
(Figure 1-P) (Optional)
An automatic unload station (Figure 1-O) is available
as an optional accessory. It is used as a collection system
for printed slides. It contains ten removable trays (Figure
1-P) that accommodate ten slides per tray. The printed
slides are pushed onto the tray one at a time until the tray
is full at which time, the tray is indexed up one tray. An
audible signal notifies the operator when no more trays
are available.
Figure 1-O
Figure 1-P
To Next Page
Loading...
General