Sakura Tissue-Tek Autowrite User Manual

Revised 3/04/11
6.7
Section 6
7. Reinsert the location plate (Figure 6-S).
Figure 6-S
NOTE: The location plate must be completely dry before
reinserting.
8. Press any key to acknowledge the end of the cleaning
procedure. The print head will move back to the
parked position and the message will move back to the
parked position and the message “15” will disappear
from the display. If no key is pressed to acknowledge
the end of the cleaning procedure, the print head will
be closed automatically after a few minutes to prevent
it from drying out.
Transportation/Storage
When preparing to transport or store the AutoWrite
Slide Printer, the ink cartridge should be replaced with a
transport cartridge. Follow the instructions outlined in
Removing and Replacing the Ink Cartridge on page 6.4.

Sakura Tissue-Tek Autowrite Specifications

General

Brand	Sakura
Model	Tissue-Tek Autowrite
Category	Printer
Language	English