Salus RT310 Installation Manual

The RT310from SALUS Controls is a stylish and accurate
digital thermostat with an easy to read Liquid Crystal Display
(LCD).
Features
• Frost protection(selectable)
• Low-Battery Warning
• Low-Battery Detection
• Modern Casing
• Sleep Mode
• User Friendly
Features
Installation
The ideal position to locate the RT310 thermostat
is about 1.5m above floor level, in a location where
the thermostat is accessible, reasonably lit and free
from extremes of temperature and draughts. Do not
mount the thermostat on an outside wall, above a
radiator or in a location where it may be subjected
to direct sunlight. The electrical connections to
the RT310 are made to the supplied industry
standard backplate. This simplifies installation, as
no connections are made to the controller itself.
Connection details are shown below - no Earth
connection is required for the correct and safe
operation of the RT310, but a parking terminal is
provided to connect an Earth wire if one is present.
RT310 front Backplate
Wiring configuration
1
2
3
COM
NO
NC
TERMINAL DESCRIPTION
1 (COM) Common Terminal
2 (NC) Switched Live OFF
3 (NO) Switched Live ON
Terminal description
RT310 Installation Manual 05

Salus RT310 Specifications

General

Display	LCD
Power Supply	2 x AA batteries
Frequency	868 MHz
Temperature Accuracy	±0.5°C
Switching Voltage	230V AC
Protection Class	IP30
Programming	7-day programmable
Communication Protocol	RF
Range	30m (open space)
Temperature Range	5 - 35°C