AFTER INSTALLATION
After completing installation and powering up the ST620RF for the first time the programmable
thermostat will behave in the following way:
All the indicators on the display and the backlight will be turned on.
After two seconds, the ST620RF will then operate in NORMAL mode and display
the current room temperature, with the RCC indicator flashing.
All programmable thermostat settings will be returned to default values.
If the Reset Button is pressed, the ST620RF will behave in the same way as
described above, except that any previously saved user settings stored in the
internal memory will be deleted and overwritten with the default settings.
13ST620RF INSTRUCTION MANUAL
To Next Page
Loading...
