1
Thank you for choosing a new SAM Horizon Crop Sprayer for your future spraying needs.
We urge you to read and fully understand this manual and keep it handy at all times as it could avoid
mistakes, frustration and excessive down time.
The Manual is divided into several sections. It is intended to cater for the Farm Maintenance Engineer as well
as the Spray Operator and these people must decide which sections of the manual are relevant to them.
Please ensure that the following details are completed when the machine is commissioned, as this
information will be required when ordering spare parts.
SAM Serial No: ................................................. Cab No: ..................................................
Commissioning Date: ..................................................
Sands Agricultural Machinery Ltd (SAM) may be contacted as follows:
Telephone: 01692 580522 Fax: 01692 580961
Email: sales@samltd.co.uk Web Site: www.samltd.co.uk
DELIVERY
Upon receipt of the sprayer, please check for transport damage. Check all major fixings at this time and at
frequent periodic intervals thereafter.
CONDITIONS OF SUPPLY
Sands Agricultural Machinery Ltd cannot be held responsible for injury or damage arising from incorrect
handling, usage or storage of this sprayer.
The Customer will become wholly responsible for items or build specifications outside our normal conditions
of supply.
WARRANTY
Sands Agricultural Machinery Ltd warrants all its products for a period of 1 year or 800 hours from the date of
delivery. Free of charge replacement by post will only be accepted if the failed component(s) are returned,
adequately packed and protected, in a representative condition. Any damage not attributed to the failure will
be charged. Engine and transmission warranties are extended by their individual manufacturers – consult
SAM for details.
SAM Ltd reserves the right to charge for fair 'wear and tear' on selected items. Unusual working practices
should also be avoided as these often contribute to a shorter working life on associated components.
It is the Company's policy to continually improve and update it’s products and SAM Ltd, therefore, reserve the
right to alter specifications and design without notice.
INTRODUCTION
1
To Next Page
Loading...