Sam4s ER-260 SERIES - Page 17

3. Installation and Operation
SAM4S ER-260 SERIES 3-3
3-2 Installation
3-2-2 Take-Up Spool Installation
If you wish to use the printer to print a sales journal, insert the paper into the paper take※ -up spool.
Wind the paper two or three turns around the spool shaft and install the spool in the mount
1. If you use the ER-260 Series with 1-station, refer to below figure. (Fig 3-3 (F))
2. If you use the ER-260 Series with 2-stations, refer to below figure. (Fig 3-3 (G))
Figure 3-3. Spool Installation