Sam4s ER-260 SERIES - 2-3 Printer Specifications

2. Product Specifications
SAM4S ER-260 SERIES 2-3
2-3 Printer Specification
2-3-1 Printer Specification
Item Description Remark
Model
• LTP8235(SII)
Print Method
• Thermal Dot Line Printing
Total Number of Dots
• 288 Dots
Printing Format
Dot Pitch
• Vertical : 0.169 mm
• Horizontal : 0.169 mm
Printing Speed
• 30mm/Sec, 8Line/Sec
Printing Direction
• Unidirectional friction feed
Feeding Method
• Friction Feed
Minimum Feed Pitch
• 0.169 mm
Paper Feeding
Feeding Speed
• 30 mm/Sec (At 6V of Motor Voltage)
Power Voltage
• 6.0V (Recommend)
Head/Motor
Power Supply Volt
Circuit Input Voltage
• 5V
Head Control/Sensor
Heat Element Density
• 6 Dots/mm (0.169 mm/Dot)
Total Head Elements
• 288 Dots/Dot Line
Printer Head
Available Printing Width
• 48 mm
Line Feed Motor
• 4-Phase Bi-Polar Stepping Motor
Head Temperature
• Thermistor
Sensor
Paper-End Sensor
• Reflecting Photo Sensor
Reliability Life
• 50km / 5×10
7
pulse
Dimension (mm)
• 38.0 (W) ×72.0 (D) ×15.6 (H)
Weight
• Approx. 50 g
Table2-2 Thermal Printer Specification